Graco 306861ZAC User Manual download pdf (Page 5)

306861 5

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious

injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to

or destruction of equipment if you do not follow the

instructions.

WARNING

INSTRUCTIONS

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

 This equipment is for professional use only.

 Read all instruction manuals, tags, and labels before operating the equipment.

 Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

 Do not alter or modify this equipment.

 Check equipment daily. Repair or replace worn or damaged parts immediately. Do not repair high

pressure couplings; you must replace the entire hose.

 Do not exceed the maximum working pressure of the lowest rated system component. Refer to the

charts on pages 2 and NO TAG for the maximum working pressure of this equipment.

 Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech-

nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

 Comply with all applicable local, state, and national fire, electrical, and safety regulations.

SKIN INJECTION HAZARD

Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely

serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also

cause serious injury.

 Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate

surgical treatment.

 Keep hands away from the end of the drain valve when opening it.

 Do not stop or deflect leaks with your hand, body, glove or rag.

 Follow the Pressure Relief Procedure on page 6, before cleaning, checking or servicing the

equipment.

 Tighten all fluid connections before operating the equipment.

 Fluid hoses must have spring guards on both ends, to help protect them from rupture caused by

kinks or bends near the couplings.

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Graco 306861ZAC User Manual Page 5