Graco 308642P User Manual download pdf (Page 6)

6 308642

Installation

See manual 307965 for electronic meters installation, operation, parts, and cautions and warnings.

NOTE: Numbers in parenthesis, for example (7), and in the Parts Drawings are reference numbers

in the Parts List on page12.

Typical Installation

Fig. 1 shows a typical installation. Additionally, these

dispense valves can be installed on a console.

Do not use this electronic metered dispense

valve on non-Graco consoles. Such use could

result in the trigger becoming inadvertently

pressed while the dispense valve is stowed.

CAUTION

Fig. 1

04472A

KEY

DESCRIPTION

H Thermal relief kit (required) Part No. 237904

Install downstream from pump.

J Fluid shut-off valve

K Hose

L Hose reel fluid inlet hose

M Hose reel

N Metered dispense valve

The installation shown in Fig. 1 is only a guide. The

components shown are typical; however, it is not a

complete system design. Contact your Graco distribu-

tor for assistance in designing a system to suit your

particular needs.

To prevent line contamination, which can cause

equipment malfunction or damage, flush the lines

before you install the equipment in the system.

CAUTION

FIRE AND EXPLOSI ON HAZARD

The movement of fluids through the

dispensing system generates static

electricity. The static electricity can

cause volatile fumes to ignite, resulting in explosion

and fire. The dispensing system must always be

grounded. See Grounding on page 8.

WARNING

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Graco 308642P User Manual Page 6