How to Spray
333394E 11
How to Spray
Take a few moments prior to spraying and re-
view these simple tips to ensure your spray-
ing project is a success.
Dual Speed Control
(Not available on all units)
The speed control feature allows you to slow
down or speed up when spraying.
•
Turn the dual speed control to LOW to
slow down the speed of application when
first learning to spray or when spraying
small items that require more control.
•
The LOW setting delivers more control
and reduces overspray when spraying
thinner materials such as stain.
•
Turn the dual speed control to HIGH
when you want to get to job done fast and
when spraying large surfaces.
•
To reduce overspray, always spray at
lowest speed that results in an accept-
able spray pattern.
Spray Techniques
Use a piece of scrap cardboard to practice
these basic spraying techniques before you
begin spraying the surface.
•
Hold sprayer 10 in. (25 cm) from surface
and aim straight at surface. Tilting the
sprayer to direct the spray angle causes
an uneven finish.
•
Flex wrist to keep sprayer pointed
straight. Fanning sprayer to direct spray
at angle causes uneven finish.
NOTE:
How fast you move the sprayer will
affect spray application. If material is pulsat-
ing, you are moving too fast. If material drips,
you are moving too slow. See
Troubleshoot-
ing
, page 24.
EVEN
FINISH
10 in.
(25 cm)
UNEVEN
FINISH
THICK
THIN
EVEN FINISH
THICK THINTHIN
Comments to this Manuals