Graco 3A1898B User Manual Page 1

InstructionsTC-130 Lubricators3A1898BENElectronically controlled, single point lubricator that provides lubrication to roller and slide bearings, shaf

Installation and Setup 10 3A1898BWith Tube and GreaseA Lubrication CanisterB Insert for Bracket, 124088C Mounting Bracket, 124304D Tube connector (use

Changing the Lubrication Canister3A1898B 11Changing the Lubrication Canister1. Relieve pressure, page 4.2. Unscrew the lubri-cation canister and remov

Troubleshooting 12 3A1898BTroubleshootingMalfunction Possible Cause SolutionNo lubricationCanister empty Replace canisterLubricator offSee Setting Up

Troubleshooting3A1898B 13Grease dispensing too slowlyAverage ambient temperature is below -20°C (-4°F)Remote mount lubricator in area with an ambient

Technical Data 14 3A1898BTechnical DataDimensionsHousing Material Transparent plasticLubricants Grease and oilDrive ElectrochemicalGrease Nozzle Threa

Notes3A1898B 15Notes

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves th

2 3A1898BWarningsThe following warnings are for the setup, use, grounding, maintenance, and repair of this equip-ment. The exclamation point symbol a

3A1898B 3EQUIPMENT MISUSE HAZARD Misuse can cause death or serious injury.• Do not operate the unit when fatigued or under the influence of drugs or a

Component Identification 4 3A1898BPressure Relief Procedure1. Cover lubrication point (A) and lubricator (B) with a heavy rag to absorb any fluid that

Installation and Setup3A1898B 5Installation and SetupDetermining Correct Mounting MethodNOTE: • Direct mounting should be used for lubrica-tion points

Installation and Setup 6 3A1898BElectronic Control SetupThe discharge settings can be programmed for any length of time between 1 to 12 months and the

Installation and Setup3A1898B 7NOTE: • If at anytime during opera-tion you need to turn the unit OFF, press the SET button repeatedly until two horizo

Installation and Setup 8 3A1898B3. Install lubricator unit into adapter (B).4. Install reducers, extensions, grease line, etc. (if necessary).5. Screw

Installation and Setup3A1898B 9Remote Mounting Installations• Installations up to 3 ft away from the lubri-cation point can be mounted with flexible t