InstructionsG40 Air Assisted Spray Gun311937GENFor the application of architectural paints and coatings. For professional use only.Model: 288513, 2896
All written and visual data contained in this document reflects the latest product information available at the time of publication.Graco reserves the
Warnings2 311937GWarningsThe following Warnings are for the setup, use, grounding, maintenance and repair of this equipment. Theexclamation point symb
Warnings311937G 3PRESSURIZED ALUMINUM PARTS HAZARDDo not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or flui
Warnings4 311937GPressure Relief ProcedureFollow this Pressure Relief Procedure whenever instructedto relieve pressure, stop spraying, check or servic
Warnings311937G 5Clearing a Clog1. Relieve pressure. Lock trigger (1a).2. Rotate tip (33) 180°. Unlock trigger (1a). Trigger gun intopail or onto grou
Warnings6 311937G14. If the diffuser (5) was removed, trigger the gun while youreinstall the diffuser with the gun tool (30). Tighten thediffuser secu
Warnings311937G 7Fluid Tube Replacement (16)1. Remove the air inlet fitting(17) using the gun tool (30)and remove the screw (20)using a 3/16 in. hex w
Parts8 311937GParts▲Replacement Danger and Warning labels, tags, and cards areavailable at no cost.◆ Included in Needle/Seat Repair Kit 255160 (purcha
Technical Data311937G 9Technical Data*All readings were taken with fan valve fully closed, (full fan size) at 20 psi (140 kPa, 1.4 bar) and 100 psi (0
Comments to this Manuals