Graco AA2000 User Manual download pdf (Page 5)

General Safety

Any misuse of the equipment or accessories, such as

overpressurizing, modifying parts, using incompatible

chemicals and fluids, or using worn or damaged

parts, can cause them to rupture and result in serious

injury, including fluid injection and splashing fluid in

the eyes or on the skin, or in fire, explosion or prop-

erty damage.

Never alter or modify any part of this equipment;

doing so could cause it to malfunction.

Check the gun and all spray equipment regularly and

repair or replace worn or damaged parts immediately.

Read and follow the fluid and solvent manufacturer’s

literature regarding the use of protective eyewear,

gloves, clothing, respirator and other equipment.

Fluid Compatibility

Be sure all fluids and solvents used are chemically

compatible with the “Wetted Parts” shown in the

Technical Data on page 19. Always read the fluid

and solvent manufacturer’s literature before using

them in this gun.

System Pressure

The High Efficiency Low Pressure System 2500

AA2000 spray gun has a 950 psi (66 bar) Maximum

Fluid Working Pressure and 100 psi (7 bar) Maximum

Working Air Pressure (indicates the maximum air pres-

sure the gun was designed to operate safely under).

Never exceed these pressures!

The Maximum Operating Air

Pressure

is 10 psi (0.7

bar). This indicates the maximum air pressure the air

cap supplied with this gun was designed to operate

at or below to comply with California Wood Rule 1136.

To guarantee compliance to rule 1136, the gun must

be used with Air Regulator Part No. 11 O-776. This

regulator limits the operating pressure to 10 psi (0.7

bar), using an air supply pressure of 100 psi (7 bar).

Be sure that all spray equipment and accessories

added to the spray system are properly rated to with-

stand the maximum working pressure of your system.

Do not exceed maximum working pressure of any

component or accessory used in the system.

IMPORTANT

United States Government safety standards have been adopted under the Occupational Safety and Health Act. These standards -

particularly the General Standards, Part 1910, and the Construction Standards, Part 1926 - should be consulted.

307-947 5

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Graco AA2000 User Manual Page 5

Comments to this Manuals

Related products and manuals for Power fine-spray systems Graco AA2000