Graco 312054J User Manual download pdf (Page 14)

Installation

14 312054J

o-rings that may be attached (FIG. 15).

7. Add or remove output spacer washers (A) from the

meter valve assembly.

NOTE:

• Add spacer washers (A) to increas output vol-

ume.

• Remove spacer washers (A) to decrease output

volume.

8. Reassemble meter body on meter valve assembly.

Use a 5/8” wrench to tighten using only enough

force to seat output washers firmly (F

IG. 16).

9. Align hex flats so a deep well socket will slide down

to the meter body for assembly onto manifold.

10. Reassemble meter onto manifold using the 5/8”

deep well socket. Torque to 2-3 ft.-lbs.

11. Hand tighten the tube nut onto the meter and tighter

1/8 turn beyond hand tight.

NOTE: Tube nuts can be reused a maximum of 8

times after the initial tightening.

12. Reconnect tubing to manifold using a 7/16” wrench

to securely tighten fitting.

IG. 15

FIG. 16

NOTICE

Do not xceed 12 ft-lbs torque or meter damage may

occur.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

No comments

Graco 312054J User Manual Page 14